Abracon’s Tiny but Mighty 2.0 products provide solutions for next-generation designs by increasing capabilities while reducing footprint. Abracon’s family of ultra-compact, Timing, and Frequency, RF & Antennas, and Inductors and Connectivity components are suitable for the IoT, Medical, and Consumer Electronic industry.
RF & Antennas
Our Tiny but Mighty 2.0 antennas are very small, approximately 2-3mm in length, and are suitable for applications where there is a space constraint. Our recently launched Saw Filters are very compact and measure only 1.1 x 0.9 mm and are suitable for applications where small components are required.
Our majority of antennas fall under either Wi-Fi/Bluetooth or GNSS protocol. Wi-fi/Bluetooth is the protocol of choice for a majority of consumer electronics such as smartwatches, smart vacuums, and fire alarms. In applications with geolocation or tracking, antennas covering GNSS/GPS frequencies are required.
Also, our UWB antennas transmit data across a wide range of frequencies and can be used to replace multiple narrow-band antennas while providing unparalleled design flexibility and seamless connectivity for uninterrupted operation.
Timing & Frequency
Abracon's ABS05 comes in at 1.6 x 1.0 mm, giving 33% more space-saving real estate than the previous ABS07. The ABS05 devices are available with ±20 ppm and ±25 ppm set-tolerance into an effective oscillator-loop load of 4.0 pF.
The ABM13W is one of the world’s smallest AT-cut quartz crystal. It's suited for space constraint applications and optimized for low plating load & ESR over industrial temps of -40C to +85C.
The ASAKMP is a Continuous Volt 32.768 kHz crystal oscillator with a ±10 ppm stability over temperature -40 to 85C and supply voltage options from 1.8V to 3.3V with Supply current < 27uA.
Inductors & Connectivity
Abracon Chip Inductors
The ASMPL low profile multilayer power inductor comes in a 1.6 x 0.8 x 0.5 and 2.0 x 1.25 x 0.5 size.
The AIMC multilayer ceramic chip inductor comes in a 0.6 x 0.3 x 0.3 and 1.0 x 0.5 x 0.5 size.
Abracon Power Inductors
The ASPI high power density molded inductor comes in a 6.0 x 6.0 x 4.5 and 6.0 x 5.7 x 4.8 size.
The AMSLA stacked core molded inductor comes in a 7.0 x 7.0 x 5.0 size.
|Series Number||Product Type||Description||Abracon In-Stock|
|ASAKMP||Miniature 32kHz XO||1.6 x 1.2mm footprint & 0.6mm profile||Check Inventory|
|ABM13W||Miniature Crystal||1.2 x 1.0mm footprint & 0.33mm profile||Check Inventory|
|ABS05||Miniature 32kHz XO||1.2 x 1.0mm footprint & 0.35mm profile||Check Inventory|
|AMPM||Power Optimized MEMs||1.6 x 1.2mm footprint & 0.84mm profile||Check Inventory|
|ACAR0301-SG3||GPS/GLONASS/BEIDOU Chip Antenna||3.05 x 1.6mm footprint & 0.55mm profile||Check Inventory|
|ACAR0301-SW2||Dual Band WiFi Chip Antenna||3.05 x 1.6mm footprint & 0.55mm profile||Check Inventory|
|ACAG0201-2450-T||2.4 GHz Chip Antenna||2.0 x 1.25mm footprint & 0.6mm profile||Check Inventory|
|ACAG0301-5500-T||5.5 GHz Chip Antenna||3.2 x 1.6mm footprint & 1.2mm profile||Check Inventory|
|ASMPL||Chip Inductor||1.6 x 0.8mm footprint & 0.5mm profile||Check Inventory|
|ASMPM||Chip Inductor||2.0 x 1.6mm footprint & 1.0mm profile||Check Inventory|
|ABSTS5A245HM03BM||SAW Filter WiFi||1.1 x 0.9mm footprint and 0.55mm profile||Check Inventory|
|ABSTS5A2-2HMM01MM||SAW Filter GPS||1.1 x 0.9mm footprint and 0.55mm profile||Check Inventory|
|ACAR3705-SB||LPWA/ Sub-GHz Cellular Chip Antenna||37.0 x 5.0mm footprint and 5.0mm profile||Check Inventory|
|ACAR3005-S824||2G/3G/GSM Chip Antenna||30.0 x 5.0mm footprint and 5.0mm profile||Check Inventory|
|AMELA2012S||Molded Inductor||2.5mm x 2.0mm footprint and 1.2mm profile||Check Inventory|