Austin, Texas – Abracon, LLC (Abracon), The Heartbeat of the IoT®, a leading global manufacturer of frequency control, timing, synchronization, RF, connectivity and power solutions collaborated with NXP® Semiconductors to address prototyping and small production needs in the Internet of Things (IoT) sector. Abracon contributions to the NXP kit include timing, RF and Near Field Communications (NFC) antenna solutions specifically selected to match the needs of NXP’s microcontroller (MCU) and RF/SOC chipsets. The NXP Rapid IoT prototyping kit was first announced during Embedded World in February 2018 and is now available through major distributors.

IoT devices have grown in complexity with more advanced computation, sensing and enhanced connectivity/RF requirements that include sophisticated hardware, firmware and software development. Simultaneously, the industry has compressed design cycles for established design teams and startups alike. Rapid IoT prototyping kits based on the Kinetis® K64F MCU and KW41Z BLE/Thread/Zigbee low power RF IC from NXP provide a ready-to-manufacture starting point for IoT designs complete with schematic, bill of materials (BOM) and software support.

“With the NXP Rapid IoT prototyping kit, we unlock the IoT to a broader spectrum of innovators,” said Sid Shaw, Sr. Director, Global Sales & Marketing for NXP Semiconductors.  “Regardless of background or skill level, innovators can take advantage of the kit to quickly develop sensor to cloud solution prototypes, as easy as 1-2-3.”

“NXP is ahead of the game recognizing that prototyping IoT designs has been too complex,” says Juan Conchas, Director of Marketing with Abracon. “This kit aims to eliminate hardware challenges of first prototypes and early production runs, allowing engineering teams to focus on their company’s primary intellectual property and core competencies. With key BOM items in inventory at major distributors, this reference design greatly simplifies and speeds development, design and procurement of hardware necessary to bring IoT applications to life.”

The bill of materials for this kit calls out six Abracon components including four- quartz crystals, a chip antenna and an NFC antenna. The Abracon devices support NXP’s MCU, wireless SOC and NFC functions. All components used within the kits are available and supported by top Abracon distributors enabling fast and easy procurement out of the gate. Engineering teams taking advantage of this support model can go from concept to small run production cost effectively and faster than ever before.

All Abracon part numbers are in stock and available now.


Table Style
Abracon Part Number Description NXP Chipset Chipset Function Abracon In-Stock
ABM11W-101-32.0000mHZ-T3 2.0x1.6mm low ESR 8pF crystal for IoT applications reducing power MKW41Z512VHT4 Low power BLE/Thread/Zigbee RF Inventory Link
ABM8G-106-12.000mHZ-T 3.2x2.5mm cost effective crystal MK64FN1M0VMD12 Main low power MCU Inventory Link
ABS06-127-32.768kHz-T 2.0x1.2mm crystal solution MKW41Z512VHT4 Low power BLE/Thread/Zigbee RF Inventory Link
ABS07-166-32.768kHZ-T 3.2x1.2mm crystal solution PCF2123BS SPI Real Time Clock (RTC) Inventory Link
AMCA31-101-2R450G-S1F-T3 Low profile 1.2mm chip antenna for BLE, WiFi, Zigbee MKW41Z512VHT4 Low power BLE/Thread/Zigbee RF Inventory Link
ANFCA-101-2515-A02 Flexible 25x15mm NFC 13.56MHz NFC antenna NT3H2211 NFC Energy harvesting NFC antenna Inventory Link


Learn more about Abracon’s components for this kit:  www.abracon.com/rapid-iot

Learn more about the NXP Rapid prototyping kit:  www.nxp.com/rapid-iot


About Abracon, LLC | The Heartbeat of the IoT®

Founded in 1992, and headquartered in Austin, Texas, Abracon is a leading global manufacturer of passive and electromechanical timing, synchronization, power, connectivity and RF solutions. Abracon offers a wide selection of quartz timing crystals and oscillators, MEMS oscillators, power and RF inductors, transformers, RF antennas and wireless charging coils, Bluetooth modules, SAW filters and resonators. The company is ISO9001-2015 certified with design & application engineering resources in Texas and sales offices in Texas, California, China, Taiwan, Singapore, Scotland, India, Israel, Hungary, UK, and Germany. Abracon’s products are offered through its global distribution network.

For more information about Abracon, visit www.abracon.com.


< arrow < arrow READ MORE ARTICLES