Audio and Video Solutions Guide for Professional and Consumer Applications Now Available | by Abracon

Austin, TX – Abracon, LLC (Abracon), a leading global manufacturer of passive & electromechanical timing, synchronization, power, connectivity and RF solutions announces the Audio and Video Solutions Guide highlighting products ideal for consumer applications such as set-top box, virtual reality, portable audio, video/teleconferencing, wearable, IoT, drones, camera/camcorder, display and high fidelity audio as well as professional applications such as audio mixers, audiophile quality receivers, broadcast equipment such as studio cameras, routers and switchers using SDI, HD-SDI and 3G HD-SDI.

As a solutions supplier, Abracon’s broad product lines address signal path, data path and power supply requirements in the most demanding applications.

View Audio and Video Solutions Guide

“Audio and video represent some of the most pervasive applications in use today,” says Juan Conchas, Director of Marketing with Abracon. “With products ranging in performance from low frequency and real time clock crystals and oscillators up to the most demanding sub 100fs and sub- 1ppm TCXOs, Abracon can be viewed as a one-stop shop for timing, power and connectivity solutions in audio and video applications.”

Featured product series in the solutions guide include:

  • ABM8, ABM10, ABM11, ABM12 compact quartz crystals supporting up to 80MHz for MCU, video processors, encoders/decoders, audio codecs
  • ASB06, ABS07 32.768kHz quartz crystals used in time-keeping, real time clock and MCU applications
  • AB-RTCMC real time clocks with integrated quartz crystals for time-keeping
  • ABLNO ultra-low phase noise and jitter (37fs rms) for audiophile, professional audio, low noise ADC/DAC applications
  • ASPI shielded power inductors for medium to high power switching supplies
  • ARJ, ARJE 10/100BASE-T to 10GBASE-T RJ45 LAN jacks w/integrated magnetics for set-top box, video routers, high speed IP cameras, PoE++ using up to 10GBase-T rates
  • ACAJ, AMCA compact chip antennas for Bluetooth speakers, smart TV, WiFi enabled set-top boxes, wearable audio, VR, drone cams
  • AWCCA wireless charging coils for portable audio, portable speaker, VR, drone cams, bluetooth headphones

  • View Audio and Video Solutions Guide

    For availability of these and other solutions contact Abracon’s franchised distributors.

    About Abracon, LLC
    Founded in 1992, and headquartered in Spicewood, Texas, Abracon is a leading global manufacturer of passive and electromechanical timing, synchronization, power, connectivity and RF solutions. Abracon offers a wide selection of quartz timing crystals and oscillators, MEMS oscillators, real time clocks (RTC), Bluetooth modules, ceramic resonators, SAW filters and resonators, power and RF inductors, transformers, circuit protection components and RF antennas and wireless charging coils. The company is ISO9001-2008 certified with design & application engineering resources in Texas and sales offices in Texas, California, China, Taiwan, Singapore, Scotland, Israel, Hungary, UK, and Germany. Abracon’s products are offered through its global distribution network.

    Carlos Suarez announced as Abracon Latin America RSM to support explosive regional growth

    AUSTIN, TX (July 11, 2017) Abracon, LLC (Abracon), a leading global manufacturer of frequency control, signal conditioning, clock distribution and magnetic components, announces Carlos Suarez as Regional Sales Manager for Mexico, Central and South America. With explosive growth in original product design activity and expansion in production capacity within the Latin America (LATAM), this new role addresses the support requirements of multiple growing industry sectors in the territory.

    As a respected sales leader in the marketplace, Carlos will be driving performance across LATAM, along with our reps and channel partners, to accelerate growth across the region. Currently, Pan America serves as the Abracon representative for ‘greater’ Mexico. This is a necessary step in Abracon’s growth plan with additional resources being explored to further service Central and South America.

    “Carlos Suarez is exactly what Abracon needs to drive the growth and success of our product line throughout Latin America, ensuring our valued customers meet their go-to-market and production needs,” adds Mike White, VP Global Sales with Abracon. “He has the tenacity and dedication to provide our customers with industry leading solutions and technology available through our team.”

    Carlos graduated from Universidad de Guadalajara in 1995 with Bachelor of Science in Industrial Engineering and received his Executive International MBA from the Moore School of Business, University of South Carolina – ITESM, Guadalajara Campus in 2007.

    About Abracon, LLC
    Founded in 1992, and headquartered in Spicewood, Texas, Abracon is a leading global manufacturer of passive and electromechanical timing, synchronization, power, connectivity and RF solutions. Abracon offers a wide selection of quartz timing crystals and oscillators, MEMS oscillators, real time clocks (RTC), Bluetooth modules, ceramic resonators, SAW filters and resonators, power and RF inductors, transformers, circuit protection components and RF antennas and wireless charging coils. The company is ISO9001-2008 certified with design & application engineering resources in Texas and sales offices in Texas, California, China, Taiwan, Singapore, Scotland, Israel, Hungary, UK, and Germany. Abracon’s products are offered through its global distribution network.

    High Speed and Industrial Grade RJ45 Solutions Guide Released by Abracon

    Austin, TX – Abracon, LLC (Abracon), a leading global manufacturer of passive & electromechanical timing, synchronization, power, connectivity and RF solutions announces the RJ45 Jacks Solutions Guide intended to highlight the company’s broad offering or RJ45 modular jacks with integrated magnetics and other LAN magnetics products. Applications such as industrial controls, network interface cards, media converters, test equipment, instrumentation, medical monitoring, machine vision, IP cameras, IoT and cloud computing and storage benefit from this product family offering a variety of solutions that support rates from 10/100Base-T up to 10GBase-T for devices requiring the high data rates.

    The industry is shifting toward surface mount assembly. Offering a selection of paste in hole (PIH) and fully surface mountable options, the products solve manufacturability challenges faced by hardware designers that have almost entirely migrated away from legacy through-hole components. Paired with support for power over Ethernet (PoE, PoE+ and PoE++), the RJ45 product family delivers the features that advanced applications require.

    High Speed and Industrial Grade RJ45 Solutions Guide Available Now

    “With double-digit growth in industrial Ethernet as well as increased requirement for bandwidth in almost every application,” says Juan Conchas, Director of Marketing with Abracon,”more of today’s devices require wireline connectivity enabled by RJ45 jacks. Abracon’s offering provides simplified solutions with integrated magnetics as well as compatibility with surface mount reflow obtained with PIH and SMD technologies.”

    Find the High Speed and Industrial Grade RJ45 solutions guide here: http://abracon.com/Support/industrial-rj45-solutions-guide.pdf

    About Abracon, LLC
    Founded in 1992, and headquartered in Spicewood, Texas, Abracon is a leading global manufacturer of passive and electromechanical timing, synchronization, power, connectivity and RF solutions. Abracon offers a wide selection of quartz timing crystals and oscillators, MEMS oscillators, real time clocks (RTC), Bluetooth modules, ceramic resonators, SAW filters and resonators, power and RF inductors, transformers, circuit protection components and RF antennas and wireless charging coils. The company is ISO9001-2008 certified with design & application engineering resources in Texas and sales offices in Texas, California, China, Taiwan, Singapore, Scotland, Israel, Hungary, UK, and Germany. Abracon’s products are offered through its global distribution network.

    TAARCOM new Abracon manufacturer’s representative serving Northern California and the Bay area.

    Austin, TX – Abracon, LLC (Abracon), a leading global manufacturer of passive & electromechanical timing, synchronization, power, connectivity and RF solutions announces TAARCOM as the new manufacturer’s representatives serving Northern California and the Bay Area. The explosive growth of industries such as IoT, cloud computing, wireless communications, medical monitoring, automotive and industrial puts ever increasing pressure on the capability to support the fast pace of today’s customer design cycles. TAARCOM’s extensive technical and sales experience ensures that our customers receive the support necessary to achieve their design and production objectives.

    “As a high quality and high volume supplier of key systems solutions for Timing, Power, RF and Connectivity,” says Ian A. Trevelyan, President of TAARCOM, “Abracon is a great fit for our organization providing excellent synergy with our existing line card offering. We look forward to supporting Abracon’s solutions in Northern California”

    “Abracon values this partnership as a strategic step toward enhancing sales support for our customers in Northern California. With extensive technical support and a complementary line card, Taarcom is well positioned to enhance the design-in process of our products and accelerating time to market for our mutual customers.” commented Mary Rea, Northeast Regional Sales Manager, Abracon.

    About Abracon, LLC
    Founded in 1992, and headquartered in Spicewood, Texas, Abracon is a leading global manufacturer of passive and electromechanical timing, synchronization, power, connectivity and RF solutions. Abracon offers a wide selection of quartz timing crystals and oscillators, MEMS oscillators, real time clocks (RTC), Bluetooth modules, ceramic resonators, SAW filters and resonators, power and RF inductors, transformers, circuit protection components and RF antennas and wireless charging coils. The company is ISO9001-2008 certified with design & application engineering resources in Texas and sales offices in Texas, California, China, Taiwan, Singapore, Scotland, Israel, Hungary, UK, and Germany. Abracon’s products are offered through its global distribution network.

    Abracon announces new rep, TAI Technical Sales, for East Pennsylvania, South Jersey, and Delaware Market

    Austin, TX – Abracon, LLC (Abracon), a leading global manufacturer of passive & electromechanical timing, synchronization, power, connectivity and RF components announces TAI Technical Sales as the new manufacturer’s representatives serving South Jersey, Eastern Pennsylvania, and Delaware. TAI brings over 100 years of sales experience to our team with strong channel growth objectives and customer centric values.

    “TAI’s mission is to offer a market advantage to our customers along with the resources they need to succeed with their designs. Partnering with Abracon perfectly aligns with this mission and provides our customers with a unique advantage, offering fast engineering support and deep industry knowledge for end market solutions. Innovative design engineers will find solutions faster and easier with the availability of Abracon products in East Pennsylvania, South Jersey, and Delaware” commented Steve Buroojy, partner at TAI Technical Sales.

    TAI is a quality extension of Abracon’s core capabilities and services in the East Pennsylvania and South Jersey markets. With TAI, our customers can leverage leading knowledge and services to design-in high quality Abracon solutions.

    “Between the two current partners, Steve Buroojy and Scott Bibus, and TAI members, Jim Heffernan and Joe Bierman, TAI brings over 100 years of experience to the table. Their vision for growth, channel strategy, and customer value proposition complements Abracon’s mission to provide exceptional support to our growing community of engineers. TAI is the perfect partner for Abracon in the Philadelphia territory” commented Steve Anderson, Northeast Regional Sales Manager, Abracon.

    About Abracon, LLC
    Founded in 1992, and headquartered in Spicewood, Texas, Abracon is a leading global manufacturer of passive and electromechanical timing, synchronization, power, connectivity and RF solutions. Abracon offers a wide selection of quartz timing crystals and oscillators, MEMS oscillators, real time clocks (RTC), Bluetooth modules, ceramic resonators, SAW filters and resonators, power and RF inductors, transformers, circuit protection components and RF antennas and wireless charging coils. The company is ISO9001-2008 certified with design & application engineering resources in Texas and sales offices in Texas, California, China, Taiwan, Singapore, Scotland, Israel, Hungary, UK, and Germany. Abracon’s products are offered through its global distribution network.

    Ultra High Frequency RFID Tag Solutions Guide Released

    (Austin, TX) Abracon, LLC (Abracon), a leading global manufacturer of passive & electromechanical timing, synchronization, power, connectivity and RF components announces the RFID solutions guide intended for customers involved in asset tracking and asset management of high value goods such as heavy machinery, servers/cloud computers, vehicles, livestock, agriculture, industrial and oil/gas exploration tools. The solutions guide offers information regarding the various uses for RFID tags and helps select tags based on range and size.

    Abracon tags integrate Alien H3 IC and high performance antennas that enables support for ISO 18000-6C/EPC Class1 Gen2. The family offers multiple form factors with small space saving 5x5mm footprint and up to 9.0meters long read range at 25x25mm. Two operating temperature ranges of -30℃ to 85℃ and -40℃ to 85℃ are available for wide temperature industrial applications. Additionally, Abracon offers antennas for customers that prefer to use their own RFID IC.

    VIEW UHF RFID SOLUTIONS GUIDE

    “Asset tracking and asset management is more important than ever,” comments Juan Conchas, Director of Marketing for Abracon. “For this reason, many of our customer base are integrating passive UHF tags into their product, making them RFID ready.”

    All of Abracon’s RFID tags are in stock and available through franchised distributors. View the solutions guide here: http://abracon.com/Support/rfid-solutions-guide.pdf

    About Abracon, LLC
    Founded in 1992, and headquartered in Spicewood, Texas, Abracon is a leading global manufacturer of passive and electromechanical timing, synchronization, power, connectivity and RF solutions. Abracon offers a wide selection of quartz timing crystals and oscillators, MEMS oscillators, real time clocks (RTC), Bluetooth modules, ceramic resonators, SAW filters and resonators, power and RF inductors, transformers, circuit protection components and RF antennas and wireless charging coils. The company is ISO9001-2008 certified with design & application engineering resources in Texas and sales offices in Texas, California, China, Taiwan, Singapore, Scotland, Israel, Hungary, UK, and Germany. Abracon’s products are offered through its global distribution network.

    Abracon Recognizes Heather Goldsmith with the 2016 Executive Partnership Award

    Las Vegas, NV – Heather Goldsmith, Director of Product Marketing at Future Electronics, was recognized today with Abracon’s 2016 Executive Partnership Award at EDS 2017, in Las Vegas, Nevada.

    The Executive Partnership award is presented to an individual who most closely aligns with Abracon’s guiding principles of prompt and diligent customer service, technical expertise, and high levels of integrity that build value with customers. Effective asset management practices and a committed strategy of investment in Abracon inventory compliment these qualities, helping customers find complete technology solutions. Heather has been an exceptional asset to the Abracon team, promoting all three of our product lines and services through the Future distribution channel.

    Mike White, VP of Global Sales at Abracon presented the award to Heather.

    “Heather Goldsmith has successfully aligned company objectives to meet the needs of the market. Her contributions and dedication to supporting our highly valued customers resulted in sizeable growth for both companies in 2016,” commented Mike White, VP of Global Sales for Abracon.

    The overall support and service from Heather has been a true advantage in extending Abracon’s solutions to a growing global audience.

    Congratulations, Heather Goldsmith on this grand achievement.

    About EDS
    EDS is an annual leadership summit. It is an important gathering of the movers, shakers and brightest minds that electronic component manufacturers, distributors and representatives have to offer. In an energized, progressive atmosphere, top decision makers come together to build business. It’s a forum to plan, discuss new opportunities, and reset goals The core of EDS is valuable idea exchange. It happens through high-level strategic meetings, event functions and informal gatherings. Business relationships are rekindled and new ones formed.

    About Abracon, LLC
    Founded in 1992, and headquartered in Irvine, California, Abracon is a leading global manufacturer of passive and electromechanical timing, synchronization, power, connectivity and RF solutions. Abracon offers a wide selection of quartz timing crystals and oscillators, MEMS oscillators, real time clocks (RTC), Bluetooth modules, ceramic resonators, SAW filters and resonators, power and RF inductors, transformers, circuit protection components and RF antennas and wireless charging coils. The company is ISO9001-2008 certified with design & application engineering resources in California and Texas and sales offices in Texas, California, China, Taiwan, Singapore, Scotland, and Germany. Abracon’s products are offered through its global distribution network.

    Abracon Recognizes Coakley Boyd and Abbett with 2016 Largest Growth Manufacturer’s Representative Award

    Las Vegas, NV – Coakley Boyd and Abbett (CBA) has been awarded Abracon’s 2016 Largest Growth Manufacturer’s Representative Award at EDS 2017 in Las Vegas, Nevada. The award recognizes CBA as the manufacturer’s representative with highest year over year growth.

    CBA exemplifies the core mission and values of Abracon’s customer centric business objectives of an agile customer service team, deep technical knowledge, and the highest degree of integrity. Their dedication and support of Abracon’s broad product lines have enabled rapid customer growth throughout the Northeast territory.

    Mike White, VP of Global Sales at Abracon, presented the award to Bob Walsh, Owner and President of CBA.

    “We are very excited to celebrate our strong partnership with CBA through this award. Working with innovative partners like CBA presents an exponential growing opportunity to provide our end-customers with the most advanced technology solutions available in the market.”

    Congratulations, Coakley Boyd and Abbett on this achievement.

    About EDS
    EDS is an annual leadership summit. It is an important gathering of the movers, shakers and brightest minds that electronic component manufacturers, distributors and representatives have to offer. In an energized, progressive atmosphere, top decision makers come together to build business. It’s a forum to plan, discuss new opportunities, and reset goals The core of EDS is valuable idea exchange. It happens through high-level strategic meetings, event functions and informal gatherings. Business relationships are rekindled and new ones formed.

    About Abracon, LLC
    Founded in 1992, and headquartered in Irvine, California, Abracon is a leading global manufacturer of passive and electromechanical timing, synchronization, power, connectivity and RF solutions. Abracon offers a wide selection of quartz timing crystals and oscillators, MEMS oscillators, real time clocks (RTC), Bluetooth modules, ceramic resonators, SAW filters and resonators, power and RF inductors, transformers, circuit protection components and RF antennas and wireless charging coils. The company is ISO9001-2008 certified with design & application engineering resources in California and Texas and sales offices in Texas, California, China, Taiwan, Singapore, Scotland, and Germany. Abracon’s products are offered through its global distribution network.

    Abracon recognizes Future Electronics with the 2016 Largest Channel Partner Award

    Las Vegas, NV – Future Electronics has been awarded Abracon’s 2016 Largest Channel Partner Award at EDS 2017 in Las Vegas. The award celebrates Future for achieving the highest revenue share in the last year and speaks to their close alignment with Abracon’s guiding principles of prompt and diligent customer service, technical expertise, and high levels of integrity that build value for our customers.

    Abracon recognizes Future as consistently driving growth and as a principal contributor towards channel investment. As a result, we continuously deliver significant supply chain benefits to end customers in the Americas, Asia, Europe, the Middle East and Africa.

    Michael Calabria, CEO and Mike White, VP Global Sales, presented the award to Heather Goldsmith, Director-Product Marketing, who accepted on behalf of Future.

    “Future continues to drive Abracon products through the channel while fully supporting our end customers. We highly value Future’s consistent investment in stocking innovative Abracon products,” commented Mike White, VP of Global Sales. “Our alignment with innovative channel partners, like Future Electronics compliments our drive to develop and distribute creative engineering solutions to the market.”

    Congratulations, Future Electronics, on this exceptional achievement.

    About EDS
    EDS is an annual leadership summit. It is an important gathering of the movers, shakers and brightest minds that electronic component manufacturers, distributors and representatives have to offer. In an energized, progressive atmosphere, top decision makers come together to build business. It’s a forum to plan, discuss new opportunities, and reset goals The core of EDS is valuable idea exchange. It happens through high-level strategic meetings, event functions and informal gatherings. Business relationships are rekindled and new ones formed.

    About Abracon, LLC
    Founded in 1992, and headquartered in Irvine, California, Abracon is a leading global manufacturer of passive and electromechanical timing, synchronization, power, connectivity and RF solutions. Abracon offers a wide selection of quartz timing crystals and oscillators, MEMS oscillators, real time clocks (RTC), Bluetooth modules, ceramic resonators, SAW filters and resonators, power and RF inductors, transformers, circuit protection components and RF antennas and wireless charging coils. The company is ISO9001-2008 certified with design & application engineering resources in California and Texas and sales offices in Texas, California, China, Taiwan, Singapore, Scotland, and Germany. Abracon’s products are offered through its global distribution network.

    Abracon Recognizes Sager Electronics with 2016 Largest Growth Channel Partner Award

    Las Vegas, Nevada – Sager Electronics was presented with Abracon’s 2016 Largest Growth Channel Partner Award at the annual EDS Summit in Las Vegas. The Largest Growth Channel Partner Award recognizes Sager as the channel partner with highest year over year growth. The award is a testament to the close alignment with Abracon’s goal of market growth in key product segments. Sager’s commitment to prompt and diligent customer service, technical expertise, and high levels of integrity help meet end customer design cycle objectives and drive growth. Abracon highly values channel partners capable of driving growth as they support end customers.

    Michael Calabria, CEO at Abracon, presented the award to Frank Flynn, President.

    “This award exemplifies the exceptional partnership Abracon shares with Sager. Their support and enthusiasm for innovative Abracon products in the channel has strongly contributed to the go-to-market success of our mutual end customers participating in growth markets,” commented Michael Calabria. “Working with innovative channel partners like Sager presents an opportunity to provide our end-customers with the most advanced technology solutions and support available.”

    Abracon congratulates Sager Electronics on this outstanding achievement.

    About EDS
    EDS is an annual leadership summit. It is an important gathering of the movers, shakers and brightest minds that electronic component manufacturers, distributors and representatives have to offer. In an energized, progressive atmosphere, top decision makers come together to build business. It’s a forum to plan, discuss new opportunities, and reset goals The core of EDS is valuable idea exchange. It happens through high-level strategic meetings, event functions and informal gatherings. Business relationships are rekindled and new ones formed.

    About Abracon, LLC
    Founded in 1992, and headquartered in Irvine, California, Abracon is a leading global manufacturer of passive and electromechanical timing, synchronization, power, connectivity and RF solutions. Abracon offers a wide selection of quartz timing crystals and oscillators, MEMS oscillators, real time clocks (RTC), Bluetooth modules, ceramic resonators, SAW filters and resonators, power and RF inductors, transformers, circuit protection components and RF antennas and wireless charging coils. The company is ISO9001-2008 certified with design & application engineering resources in California and Texas and sales offices in Texas, California, China, Taiwan, Singapore, Scotland, and Germany. Abracon’s products are offered through its global distribution network.