March 2012
NEW! ABFT-Frequency Translator
Abracon has introduced its ABFT series of Frequency Translator / Jitter Attenuators, ideally suited to improve Jitter characteristics of the 10.0MHz input signal. This device is designed to provide input clock smoothing - while providing Phase and Frequency Locked higher frequency translated output.
Typical application will take a 10MHz reference frequency and phase and frequency lock it to either a 20MHz or a 40MHz Low Jitter VCXO. The implemented technology significantly attenuates the jitter content of the 10MHz reference signal; while keeping the higher frequency RF Output - Frequency and Phase Coherent with the input 10MHz reference signal.
• 5 x 7 x 2 mm SMT, RoHS Compliant reflow-able package
• Frequency translation to either 20MHz or 40MHz carrier
@ +3.3V Supply Voltage
• Industrial operating temperature range (-40ºC to +85ºC)
• LVCMOS Output
• Internal absolute pull range > ±100 ppm allowing for long term drift correction
Detail data sheet can be downloaded by visiting: http://www.abracon.com/Precisiontiming/ABFT.pdf
These devices will be available through our distribution partners in May-2012, with large volume availability in 8-weeks ARO.
For additional information please contact tech-support@abracon.com.
February 2012
NEW! ABBTM-2.4GHz-T
To satisfy an ever increasing demand for low cost, FCC Certified Bluetooth Modules, Abracon Corporation has developed and launched its ABBTM-2.4GHz-T, Bluetooth solution. Based on CSR BC417143B-DS BlueCoreTM 4-External Chipset with on-board antenna, this module offers a total-turn-key device for customers seeking low cost Bluetooth functionality.
Available in standard tape & reels of (250) & (500) units, this device is available for less than $10 in 10k quantities. To assist with engineering evaluation, Abracon also offers a low cost evaluation board (ABBTM-2.4GHz-EVAL), which mates with the serial port PC interface and a Bluetooth Dongle. Detail data sheets can be downloaded by visiting: http://www.abracon.com/Precisiontiming/ABBTM-2.4GHz-T.pdf & http://www.abracon.com/Precisiontiming/ABBTM-2.4GHz_Eval.pdf
Both devices are currently in stock at our distribution partners (http://www.abracon.com/nadist.htm), with large volume availability in 8-weeks or less.
For additional information please contact tech-support@abracon.com.
November 2011
NEW! GHz Crystal Oscillators
To address high frequency - Low Jitter timing needs, Abracon Corporation has developed ASGX and ASGX-V series of fixed frequency and Voltage Controllable Crystal Oscillators; available from 10MHz to 1.5GHz resonant frequencies. These are factory programmable devices offering exceptional jitter characteristics of 2ps rms maximum at 1.5GHz carrier. Available from 10MHz to 250MHz with LVCMOS output and, 10MHz to 1.5GHz with LVDS or LVPECL outputs; these devices are ideally suited to address timing requirements for Multimedia, Computing, Networking, Phase Locked Loops, DDS, etc.
Standard 5*7*2mm SMT RoHS compliant packaging offers a space saving solution. These devices are in stock at our Global Distribution Partners at popular frequencies, and can be made available at any frequency between 10MHz and 1.5GHz. Evaluation units can be purchased with a quick turn of less than 5-business days.
For additional information please contact tech-support@abracon.com.
October 2011
Sync 'n Go- Portable Precision Frequency Reference
Continuing on its efforts to provide value added solutions, Abracon Corporation’s advanced engineering group has announced the availability of the Portable Precision Frequency Reference "Sync'n Go"; targeted to aid engineers & technicians - both in the laboratory and field environment. This pocket size high precision 10MHz reference-source is designed and manufactured in USA and may be Synchronized with any 10MHz standard, such as a GPS tracked 10MHz reference oscillator. With an integrated Stratum-III reference, this device is capable of holding ±5 ppb frequency accuracy - post sync.
Sync'n Go is now available through Abracon's Global distribution partners. Please contact Abracon or our distribution partners for immediate delivery.
Please visit: http://www.abracon.com/Precisiontiming/SYNC-10MHz.pdf for additional details.
For additional information please contact tech-support@abracon.com.
July 2011
Fundamentals of the Pierce Oscillator
Continuing its tradition of outstanding customer service, Abracon's Advanced Engineering Group has authored an article on the Fundamentals of the Pierce Oscillator. This article addresses the subtleties of the Pierce Oscillator circuit, in conjunction with Quartz Crystal Resonators. Please visit:http://www.abracon.com/support/facn_abracon_jul2011.pdf
APRIL 2011
ABLJO & ABLJO-V- an Ultra Low Jitter Series of Oscillators!
Abracon's Advanced Engineering Team has introduced an Ultra Low Jitter Series of Oscillators (ABLJO & ABLJO-V) guaranteed to hold better than 0.10 ps of rms jitter over 12kHz to 20MHz BW from the carrier. Designed with third overtone crystal technology, these devices are ideally suited for RF circuitry, requiring exceptional close to the carrier jitter performance.
Please visit: http://www.abracon.com/Precisiontiming/ABLJO.pdf for additional details.
MARCH 2011
Pierce Analyzer System (PAS) Advanced Board Characterization Service
Abracon Corporation has developed the industry's most Advanced Board Characterization service to assist design engineers characterize their Pierce Oscillator Loop and provide optimal component values.
Key features include:
• Eliminates probability of oscillator start-up issues related to inadequate design or marginal component performance
• Eliminates production launch issues related to crystal oscillator based timing circuit
• Solves for design margin uncertainty
• Provides customer's oscillator-circuit-overview in the form of a detailed report, which could be an ideal 3rd party assessment for the design history file or PPAP documentation.
• This report encompasses both the stand-alone crystal performance, as well as in-circuit behavior outlining safety factor as a function of crystal's ESR, etc.
For questions or to receive a representative copy of the Characterization Report, detailing actual in-circuit measurements using Abracon's Advanced Board Characterization service; please contact
tech-support@abracon.com.
FEBRUARY 2011
The AOCJY5 series of Wide Temperature Range OCXO's!
Abracon has launched its AOCJY5 series of Wide Temperature Range OCXO's; available through its Global Distribution Partners. Initially offered at 10MHz carrier, these devices hold better than ±50 ppb frequency accuracy over the operating temperature range of -55°C to +85°C.
Ideally suited for outdoor applications, including Military radios and other timing solutions utilizing COTS products, this series provides a low cost solution addressing challenging performance constraints. With a guaranteed overall accuracy of better than ±1.00 ppm including all factors such as Aging over 10-years; this device offers an ideal low cost, low noise, wide temperature range solution.
Please contact the Abracon team at abinfo@abracon.com for more information.
AUGUST 2010
ABM12 Series Ultra Miniature 1.6 x 1.2 x 0.45mm SMD Seam Seal
4-pad Ceramic Packaged Crystal.
Abracon releases its smallest SMD packaged crystal yet measuring only 1.6 x 1.2 x 0.45mm. This miniaturized crystal is ideal for high density applications and more specifically wireless RF devices.. The ABM12 utilizes an electron beam seam sealing method which offers outstanding reliability and high precision accuracy.
The most popular wireless frequencies 26MHz, 30MHz, 32MHz, and 36MHz are in stock for immediate shipment. Other frequencies are available or under development so please contact Abracon or one of our authorized distribution partners listed on our website for more information.
Features:
- Smallest package in the industry at 1.6 x 1.2mm
- Extremely Low in height at 0.45mm
- Tight tolerance and stability available
- IR reflow capable
Typical Applications:
- Blue-Tooth, Wireless Applications
- PCMCIA and related PC peripherals
- Portable radios and MP3 players
- Communications, instrumentation, test equipment
- General purpose SMD crystal for high density applications
- Medical and Automotive grade available upon request
Please contact the Abracon team at abinfo@abracon.com for more information.
JULY 2010
Avnet Electronics Marketing Signs Distribution Agreement with Abracon Corporation
PHOENIX -- Avnet Electronics Marketing Americas, a business region of Avnet, Inc. (NYSE: AVT), today announced a distribution agreement with Abracon Corporation, a global manufacturer of precision frequency control, signal conditioning, clock distribution and inductive products. Avnet Electronics Marketing will now begin distributing Abracon's complete line within the Americas region... CLICK HERE TO READ MORE!
MAY 2010
ABRACON introduces new Case Grounded SMD Low Profile Crystal for
EMI sensitive applications.
The new ABLSG crystal available in our ruggedized HC49S/AT49 SMD package is designed to provide increased EMI shielding by adding a third lead to case ground. This crystal is suitable for a wide range of EMI sensitive applications including industrial, medical, automotive, and commercial. Tight stabilities and wide operating temperatures are also available.
Please contact your local sales representative or send us your requirements at abinfo@abracon.com.
MARCH 2010
ABRACON INTRODUCES THE ABPSM-ULN-A ULTRA LOW NOISE POWER SUPPLY MODULE!
Abracon Corporation has announced its latest product offering addressing Ultra Low Noise Power needs to facilitate noise sensitive measurements.
Ideally suited to conduct Phase Noise, Jitter and Noise Figure measurements, the ABPSM-ULN-A Power Supply Module is capable of sourcing 200mA per channel, while maintaining better than 25nV / √Hz @ 1kHz offset.
ABPSM-ULN-A device is designed to overcome challenges routinely encountered by design & test engineers; when making measurements on oscillators, amplifiers, PLL’s, VCO’s and the like. ABPSM-ULN-A practically eliminates the noise contribution from the Power Source itself; thereby providing a means to accurately quantify performance of the device under test.
Offering four standard bias levels including 1.8V, 2.5V, 3.3V & 5.0V; this device is biased off a Universal AC-Adapter, providing World-Wide functionality. The ABPSM-ULN-A is a must have for every lab bench in Development & Testing environment.
Please contact your local sales representative or send us your requirements at abinfo@abracon.com.
FEBRUARY 2010
STANDARD FREQUENCIES NOW AVAILBLE IN STOCK AT DIGI-KEY & MOUSER!
 Click here to view inventory
Abracon Corporation introduces its New Ultra-Low ESR Quartz Crystal series, utilizing its proprietary processing methodology.
The ABLS-LR series is designed to mate with the next-generation µcontroller and Transceiver Integrated Circuits. These crystals are optimized to properly function under any drive-level, from a few µW to 500µW; without impacting the gain margin of the oscillator loop. With maximum ESR of 10Ω’s @ 13MHz to 36MHz carrier, these devices enable designers to arrive at low power solutions, without compromising performance.
Available in a ruggedized welded metal package, these devices are offered in varying stabilities up to -55°C to +125°C operating temperature range. This low cost timing solution is the latest Abracon attempt to converge on price, performance and size.
Please contact your local sales representative or send us your requirements at abinfo@abracon.com.
DECEMBER 2009
NEW! ABM8G Series Ultra Miniature 3.2 x 2.5 x 1.0mm SMD Glass Sealed
4 pads Ceramic Packaged Crystal.
Abracon releases the latest version of our popular 3.2 x 2.5 x 1.0mm SMD crystal. The ABM8G utilizes a glass sealing method which offers reduced cost and at the same time tight tolerances and wide temperature operation capability.
Features:
- Low in height at 1.0mm
- Tight tolerance and stability available
- IR reflow capable
- Lower cost compared to seam sealed packages
Typical Applications:
- Audio and Video Equipment
- Communications Equipment
- USB Interface, PDA, PC Peripherals
- General purpose SMD crystal for high density applications
For additional information on ABM8G series or if you have specific questions, please contact the Abracon team at abinfo@abracon.com
SEPTEMBER 2009
Abracon introduces the worldwide availability of the AOCJY Series
surface mount OCXO through its distribution partners.
Abracon introduces the AOCJY Series of ovenized precision oscillators in a miniature, surface mount package – designed to withstand RoHS reflow. Constructed with High-Q, SC-cut blanks, this series offers excellent close-in phase noise at 3.3V or 5V bias. Available from 10.000MHz to 100.000MHz with either sinewave or squarewave outputs; these devices are optimally suited for high frequency up-conversion with minimal phase noise degradation.
Facilitating quick turn-around for design/concept verification, these devices are in stock for immediate delivery at Abracon’s Distribution partners (Digikey, Future, and Mouser).
For additional information on AOCJY series or if you have specific questions, please contact the Abracon team at abinfo@abracon.com
AUGUST 2009
Abracon Corporation introduces Precision Test and Burn-in Sockets
for crystals,
oscillators and saw device packages!
Abracon's new AXS series of precision test & burn-in socket solutions designed specifically for Crystal, Oscillator, and SAW Devices, feature reliable POGO pin and easy-to-use clam shell architecture. Abracon’s new AXS series sockets are designed to enable accurate reliable test and measurement, and side-by-side comparison evaluation of the most widely used Frequency Control device package sizes from 2.0 x 1.2mm up to 11.8 x 5.5mm. Initially, the full line of Abracon AXS series test and burn-in sockets will be available to purchase from stock at www.Digi-Key.com and www.mouser.com.
• Accurate and reliable testing of frequency control devices
• Contact force ideal for avoiding measurement error
• Highest quality socket available
• Clam shell design for easy open and close
• Reliable gold plated POGO pins
• Suitable for high temperature burn-in test
• Operating Temperature: -30 ~ +150°C
JUNE 2009
Abracon Corporation introduces industry’s smallest profile tuning fork crystal
with 0.60mm maximum height.
Engineered to facilitate the most challenging high density designs, the ABS06 is targeted to alleviate surface area constraints; typically associated with tuning fork devices. This 2.0 x 1.2 x 0.6mm crystal resonator is ideally suited for next generation portable or handheld Transceiver solutions -- requiring optimal performance, in an ultra miniature footprint.
Please contact your local sales representative or send us your requirements at abinfo@abracon.com.
MARCH 2009
Abracon introduces new Surface Mount 32.768kHz CMOS Clock Oscillators
Ultra Miniature Packages in 2.5 x 2.0 x 0.95 mm and 3.2 x 2.5 x 1.2mm
ASDK and ASEK Series
Abracon introduces new series of ultra miniature packaged surface mount 32.768kHz CMOS Clock Oscillators featuring low mA current consumption and supply voltages of 1.8V, 2.5V, and 3.3V. Common applications include Utility Metering, Timekeeping for PC’s, Peripherals, Mobile Phones, Digital Cameras, MP3’s, and many general purpose real time clock applications. Please contact Abracon Corporation or one of our authorized stocking distributors for ordering information.
Please be sure to check ABRACON’s complete 32.768kHz oscillator family including the 4.0 x 2.5mm ASHK-32.768KHz series featuring uA current consumption.
JANURAY 2009
MEMSpeed Pro – Low-Power Oscillator Programming in Seconds!
New for 2009! The compact MEMSPeed Pro Kit from Abracon includes all hardware and windows compatible software necessary for the user to easily program custom oscillator frequencies in the field, or in the lab. Avoid lead-time delays and program what you need, when you need it! The Deluxe Kit includes 200pc of surface mount miniature package blank oscillators.
SEPTEMBER 2008
Abracon introduces new 5.0 x 7.0 mm Programmable Spread Spectrum Low EMI Oscillator
ASSVP
Abracon releases next generation Programmable Spread Spectrum Low EMI Oscillator. The new ASSVP provides an immediate solution to EMC Compliance issues with small quantity quick turn delivery in 1-5 days. In addition, the ASSVP is ideally suited for mass production quantities by using a conventional ceramic oscillator production process with a highly reliable 5.0 x 7.0mm standard seam seal package. Low noise Spread Spectrum Oscillators are ideal for applications such Medical Electronics, Military & Aerospace, Printers, Televisions, PDA's, Laptop Computers, Industrial Controls, and many other common applications requiring strict EMC compliance.
The ASSVP features include
-Low cost solution for EMC compliance
- 2.5V or 3.3V supply voltage
- 13MHz to 160MHz wide frequency range available
- Various spread rate: Center spread±0.125% to ±1.00%, Down spread -0.25% to -2.00%
- EMI reduction -15dBc min. 100MHz at C12
- 2ms typical start up time
- CMOS output
- 10 to 30mA typical current consumption
- Tri-state
May 2008
Abracon Corporation and Discera partner with Digikey to make
MEMS Oscillators available from stock
April 2008
Abracon Corporation launches 32.768KHz Crystal and Oscillator ad campaign with
Electronic Products Magazine
February 2008
Precision Solutions’ Press Release
Click here to go there now
Abracon has expanded its product portfolio to address the strategic needs of its customers, requiring Precision Frequency References. The AST3 series offers Stratum-III stability of ±4.60 ppm; over all operating conditions including Aging for 20-years in the field. Offered in a space saving, low profile (7x5x2 mm) Seam-Sealed Hermetic package, AST3 offers exceptional frequency stability of ±0.37 ppm max. over -40ºC to +85ºC. Available with either CMOS or Clipped Sinewave Output, AST3 is offered at standard frequencies in the 10MHz to 26MHz range.
Customers requiring higher precision but are constrained by available surface area can incorporate the exceptional performance of Abracon’s Ovenized AOCXS devices. Offered in a 25.4 x 22.1 x 15.3 True SMT – RoHS Compliant Reflow-able Package; AOCXS offers frequency precision of ±30 ppb over -30ºC to +70ºC; while maintaining excellent close-in Phase Noise (-135 dBc/Hz Typ. @ 100Hz from the carrier). AOCXS is offered at standard frequencies in the 5MHz to 40MHz range.
Systems requiring excellent receiver sensitivity can leverage the exceptional close-in phase noise of the AVSS series of SMT VCXO’s. These devices are offered in industry standard 9*14 package, optimized to drive 50Ω systems and generate minimal Total Harmonic Distortion (THD). These devices eliminate the need for an auxiliary tuned stage to drive 50Ω loads. Offering Pure Sinewave output, AVSS series is configured with optimal biasing techniques, preserving current drain. With an “oven like” close-in phase noise of -135dBc/Hz @ 1kHz offset and -155dBc/Hz floor for a 28MHz carrier, the ±40 ppm available pull-ability makes the AVSS a unique VCXO solution.
December 2007
Abracon Releases New Thin Film Chip Inductors
ATFC Series in Compact 0201, 0402 and 0603 Cases
ATFC-0201(0402, 0603)
Abracon has introduced 3 new thin film chip inductors in compact 0201, 0402 and 0603 EIA case sizes designed for cellular phones, GPS modules and wireless LANS, VCO, TCXO circuits and RF transceiver modules (other applications apply, please visit website for further details). The Thin Film Chip Inductors offer stable inductance in high frequency circuits and excellent Q at specified frequencies from 300MHz up to 500MHz.
With dimensions of 0.6 x 0.3 x 0.3mm, 1.0 x 0.5 x 0.32mm & 1.6 x 0.8 x 0.45mm respectively, the lightweight ATFC-0201, ATFC-0402 and ATFC-0603 introduce broader product ranges and competitive price structures to the market. This allows for the design of smaller and more affordable products in the communications market for our customers. Featuring lead (Pb)-free and RoHS-compliant construction, Abracon’s ATFC series is compatible with reflow or flow soldering manufacturing processes.
Samples are available now! Please contact your Abracon Sales representative for more information.
_____________________________________
Abracon Releases New Encapsulated Toroidal Transformers
ACTT-0XXX Series
Abracon announced the release of their new encapsulated toroidal transformers, the ACTT-0xxx series, for medical equipment, test equipment and advanced A/V systems, etc. This series features fully encapsulated, low magnetic stray field emissions, low standby current and high ambient operating temperature (up to 60ºC with insulation class F, 155 ºC).
With dimensions from 40 x 40 x 18.5mm to 100 x 100 x 42mm, Abracon’s ACTT-0xxx series provide power range from 1.6VA to 85VA, with dual primary (115V/230V 50/60 Hz), series or parallel secondary availabilities. All ACTT-0xxx series parts are UL506, 5085-1, 5085-2 and UL6500/60065 approved. For further part details, we invite you to visit our new Transformers webpage: click here.
Samples are available now! Please contact your Abracon Sales representative for more information.
November 2007
Abracon Unveils New Magnetics Website | Click here to go there now
We've expanded our magnetics line & also unveiled our new magnetics website!
From Power Inductors to Transformers, the new Magnetics website is easier to navigate through & simpler to find items by category. The new layout also consists of our new outline drawing section where each part's individual technical drawing is displayed, making it easier for customers to view part specifications & sizes. The Features & Applications of each part are also displayed on the part's main page so customers can get a quick glance at a part's context. Check it out now: click here.
July 2007
Abracon releases 2.4GHz BPF for Bluetooth, 802.11 and Custom-RF
AFS-2442.0S4
Abracon has introduced a new, highly selective 2.4GHz Band Pass Filter for ISM Band, Bluetooth and 802.11 b/g/n TX applications. This Surface Acoustic Wave (SAW) device offers less than 2.0dB of typical in-band insertion loss over -20°C to +70°C operating temperature range.
With +15dBm of guaranteed input power handling, this device offers 47.0dB rejection from DC-to-2.3GHz typical. Additionally, high side rejection of 48.0dB typical from 2.52GHz to 2.65GHz makes it ideal for spectral sensitive applications.
Designed for a 50Ω system, this RoHS compliant device is offered in an industry standard
3.0 x 3.0 x 1.4 mm SMT package. Samples are available now! Please contact your Abracon Sales representative for more information.
June 2007
Abracon releases two new Tight Stability Industrial Grade Oscillators in
5.0 x 3.2 x 1.2mm and 3.2 x 2.5 x 1.2mm package sizes
ASET and ASFLT
Abracon's new Industrial Grade CMOS Oscillators offer tight stability at +/- 5.0 ppm, -40 to +85C. These high performance industrial grade CMOS Oscillators offer fast start-up time and exceptional phase noise, jitter, and current consumption. The ASFLT and ASET series have been developed for target applications such as home networking via AC sockets, Wireless LAN, Mobile Communications, PLC Modems, WiMax, and other high precision applications where replacing a Clipped Sine Wave TXCO with a CMOS precision Oscillator is advantageous.
Samples for standard frequencies for the ASET Series will be available starting Q3 2007. ASFLT is available now!
Please contact ABRACON for more information or to request sample availability for your new design.
|
